Canon SX7 MARKII Setting up the Digital Video Input Signal, Setting a Password, [Digital video], [Password settings]

MENUS FROM FUNCTIONS UP SETTING

Setting up the Digital Video Input Signal

[Digital video]

DIGITAL VIDEO

You can select the standard of the digital video input signal.

T

System settings

T

Other settings

T

Digital video

FProjects a full range digital signal.

LProjects a limited range digital sig- nal.

Press the [OK] button to confirm, and then press the [MENU] button.

z Refer to the User's Manual that came with the AV equipment for more detailed information on settings.

Setting a Password

[Password settings]

DIGITAL PC ANALOG PC

DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO

You can set a password to the projector.

Once you set the password, you will need to enter the password each time you turn on the projector.

T

System settings

T

Other settings

T

Password settings

Off	Disables the password protection.
	Enable the password protection.
On

Press the [OK] button to confirm, and then press the [MENU] button.

z Once you set a password, the password entry screen appears at power- on. Enter a 4-digit password with [<], [<], [<], and [>]. If the password is valid, projection starts. If you enter a wrong password three times, the projector will be turned off.

zTo cancel the password, remove the power plug from the AC outlet after the projection, and then insert the power plug while holding down the [MENU] button until the projector beeps.

116