Canon SX7 MARKII Placing on a Level Place, Placing in Front of the Screen, Determining the Installation Position, Ceiling Mounting or Rear Projection

Determining the Installation PositionPlacing in Front of the ScreenPlace the projector perpendicular to the screen

as far as possible.	Screen
z A slight error in the projection angle can be
corrected using the [KEYSTONE] button
(P52).
	Optical axis

Placing on a Level PlacePlace the projector on a level place as far as pos- sible.

z A slight tilt can be corrected using the rear adjustable foot. (P43)

zMake sure that the installation position is

free from any obstacle that may block the exhaust vent (fan) on the right side of the projector and the air intake vent on the bottom of the projector.

zThe screen must not be exposed to direct sunlight or light from lighting equipment. In a bright room, it is recommended to limit ambient lighting in order to improve the image quality.

Ceiling Mounting or Rear Projection

You can mount the projector on the ceiling (Ceiling mounted) with it turned up side down or place it behind the screen (Rear) if you use a translucent screen. For ceiling mounting or rear projection, you have to invert the projected image. (P97).

PROJECTOR THE UP SETTING

Ceiling Mounting Rear Projection

33