Projecting a Video Image from an AV Equipment

You can project a video image with the steps similar to those for projecting an image from a computer.

This section provides information specific to the projection from an AV equipment. For more detailed information for each step, refer to the corresponding page.

1 Turn on the projector. P40*zConnect the power cord and turn on the projector. P40zAdjust the height of the projecting image. P43zSelect a display language for the first time. P41

zAdjust the focus by performing the auto setup or the focus adjustment if you can- not read the message due to out of focus. P46, 51

2 Prepare the AV equipment.zTurn on the AV equipment and start playing the video image.

For digital content video image:

3 Press the button to switch the input signal. P70zSelect [DIGITAL VIDEO] as the input signal.4 Press the button twice. P70

zAdjust the input signal, focusing, keystone distortion, and so on automatically using the auto setup function.

EQUIPMENT AV FROM IMAGE AN PROJECTING

5 Press the button.zSelect an appropriate image mode depending on the projecting image. P55*zSelect an appropriate screen mode from the [Aspect] menu. P73, 90, 91

Stopping projection...

Turn off the projector. P60*zTurn off the projector and remove the power cord from the AC outlet.

*Those steps are same as those for projecting the computer screen.

69