Replacing the Lamp

1 Turn off the projector, disconnect the power plug from the AC outlet, and then let the projector stand for at least 1 hour.

2 Loosen a screw with a flathead screwdriver and remove the lamp cover.

3 Loosen two screws, pull up the handle, and

Handle

then remove the lamp.

4 Fully insert a new lamp and secure it with two screws.

*After the installation, be sure to push down the handle.

Lamp

5 Replace the lamp cover and tighten the screw.

6 Turn on the projector.

7 Bring up the menu and select [System set- tings] -> [Other settings] -> [Lamp counter] (P118).

8 Select [Reset] -> [OK] to reset the lamp counter.

Lamp cover

Screw

Screw

Lamp cover

MAINTENANCE

 

123