Canon SX7 MARKII Turning On/Off the LED Illumination, Setting up the Remote Control, [Remote control], [LED illumination]

Turning On/Off the LED Illumination

[LED illumination]

DIGITAL PC	ANALOG PC
DIGITAL VIDEO	COMP./SCART	VIDEO/S-VIDEO

You can turn on/off the LED illumination lamp and the LEDs on the terminals (P26, 27, 28).

T

System settings

T

LED illumination

Off	Turns off all LEDs.
	Turns on LEDs as necessary.
On

Press the [OK] button to confirm, and then press the [MENU] button.

z This setting does not effect the POWER indicator or WARNING lamp.

Setting Various Function

Setting up the Remote Control

[Remote control]

DIGITAL PC	ANALOG PC
DIGITAL VIDEO	COMP./SCART	VIDEO/S-VIDEO

You can change the channel settings to prevent the two remote controls from interfering with each other when you use two projectors at the same time.

T

System settings

T

Other settings

T

Remote control

Ch1	Selects the channel on the projector
	you use.
Ch2

Press the [OK] button to confirm, and then press the [MENU] button.

Selecting a Channel on the Remote Control Press the [LIGHT] button for 3 seconds while holding down the [OK] button on the remote control.

The above operation toggles the channel between Ch1 (the button flashes once) and Ch2 (the button flashes twice).

z Make sure to set the same channel for both remote control and projector.

zPerforming this operation with the remote control, you cannot control the projector after pressing the [OK] but- ton. Make sure to change the channel for the remote control at the same time.

MENUS FROM FUNCTIONS UP SETTING

115