Canon SX7 MARKII 4:3, „4:3, 16:9, „16:9, Select this when you use a screen with aspect ratio of 4:3, Select this when you use a screen with aspect ratio of 16:9

EQUIPMENT AV FROM IMAGE AN PROJECTING

Selecting Aspect Ratio of the Projecting Image (Screen aspect)

You can select among three aspect ratios of the projecting image according to the aspect ratio of the projected screen.

You can project an image on the whole screen by setting [Screen aspect].

zYou can set [Screen aspect] from menu. Refer to the section [Screen aspect] on the menu for details (P101).

„4:3

Select this when you use a screen with aspect ratio of 4:3.

The following table shows the available [Aspect] mode for each input signal.

Input signal	Available [Aspect] mode
VIDEO	Full screen
S-VIDEO
	Wide
SCART
COMPONENT	Full screen
	Auto
DIGITAL VIDEO
	Wide

„16:9

Select this when you use a screen with aspect ratio of 16:9.

Select [4:3] from the [Aspect] menu if you want to project a video image with aspect ratio of 4:3 in this mode (P73).

The following table shows the available [Aspect] mode for each input signal.

Input signal	Available [Aspect] mode
VIDEO	4:3
S-VIDEO
	Wide
SCART
COMPONENT (480i/575i/480p/575p)	4:3
DIGITAL VIDEO (480p/575p)	Wide
COMPONENT (720p/1035i/1080i)	Wide
DIGITAL VIDEO (720p/1080i)

z [Auto screen color] may not correct the screen color properly. If such is the case, correct it manually. (P98)

74