Canon SX7 MARKII Selecting a Language, zYou can change the language from the menu at a later time (P113), Select a language with the POINTER buttons and press the [OK] button

The countdown window is displayed for approximately 20 seconds, and then the guiding message for the auto setup function appears.

Adjust the focus by performing the auto setup or the focus adjustment if you cannot read the message due to out of focus. (P46, 51)

The LED illumination lamp blinks blue until the projection is started. To project an image immediately, press the [OK] button.

z Enter a password if the Password input screen appears (P116, 117).

z You can turn on the projector by connecting the power cord without pressing the [POWER] button (direct power on) (P112).

zYou can display a specified Logo on the countdown screen (P100).

zYou can specify whether to enable or disable the LED illumination lamp (P115).

zYou can skip the countdown window (P100).

Selecting a Language

A window appears when the projector is turned on for the first time. You can select a language to be used by the projector for displaying menus and so on in the window. Select your language as shown below.

Select a language with the POINTER buttons and press the [OK] button.

An item highlighted in orange will be selected.

zAdjust the focus by performing the focus adjustment if it is out of focus (P51).

zYou can change the language from the menu at a later time (P113).

COMPUTER THE FROM IMAGE AN PROJECTING

41