About this Manual
Operating modes
indicates that a function is available in the
operating mode indicated and 
indicates that the function is not available. For a detailed explanation, refer to Turning the Camcorder On and Off (025).
When a function requires the use of the menu, the quick reference shows the submenus and, when applicable, the default setting for the menu item. The example illustration indicates
that you can find the function by selecting the 11 [JOther Functions] menu and then the [Rec Review] menu item.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Reviewing a Recording |
|
|
Reviewing a Recording |
|
|
| ||||||
When the camcorder is in | mode, you can review the last clip that |
|
|
| |||||
[J Other Functions] |
|
| |||||||
was recorded. |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
Operating modes: |
|
|
|
|
| [Rec Review] |
|
| |
|
|
|
|
|
|
| |||
1 | Open the [Rec Review] submenu to set the review length. | [Last 4 sec] |
|
| |||||
| [J Other Functions] | [Rec Review] |
|
|
|
|
| ||
2 | Select the desired option and then press SET. |
|
|
|
| ||||
3 | After you finish recording, press the Ubutton. |
|
|
| |||||
• The last clip that was recorded is played back without audio for the selected duration. [AREVIEW] appears at the top of the screen.
• Press the CANCEL button to stop reviewing the clip and change the camcorder back to record pause mode.
• After the clip finishes playing back, the camcorder returns to record pause mode.
Options
[Entire Clip]: Allows you to review the entire clip.
[Last 4 sec]: Allows you to review just the last 4 seconds of the clip.
NOTES
•When you are using a special recording mode (088), you cannot review a clip.
•If the camcorder switched CF cards during a recording, the camcorder will play back the clip on the CF card most recently recorded on.
When a procedure requires selecting an option, the available options are listed within or after the procedure. Brackets [ ] are used to refer to menu options as they are displayed on screen.