Reviewing a Recording
Reviewing a Recording
When the camcorder is in | mode, you can review the last clip that | [JOther Functions] |
| |
was recorded. |
| |||
87 | ||||
| ||||
Operating modes: 
1 Open the [Rec Review] submenu to set the review length.
[JOther Functions] 
[Rec Review]
2 Select the desired option and then press SET.
3 After you finish recording, press the Ubutton.
•The last clip that was recorded is played back without audio for the selected duration. [AREVIEW] appears at the top of the screen.
•Press the CANCEL button to stop reviewing the clip and change the camcorder back to record pause mode.
•After the clip finishes playing back, the camcorder returns to record pause mode.
Options
[Entire Clip]: Allows you to review the entire clip.
[Last 4 sec]: Allows you to review just the last 4 seconds of the clip.
[Rec Review]
[Entire Clip]
NOTES
•When you are using a special recording mode (088), you cannot review a clip.
•If the camcorder switched CF cards during a recording, the camcorder will play back the clip on the CF card most recently recorded on.