bSynchronizing with an External Device
NOTES
•The user bit of the time code signal is output while the camcorder is recording in 
mode or during
playback of a clip in 
mode. When the [JOther Functions] 
[Frame Rate] setting is set to [24P] and
76the [LTC/UB Setup] 
[User Bit] 
[Output Mode] setting is set to [Pulldown], the user bit will be 2:3 pulldown data. In other words, when a recording in 24P mode is output from the HD/SD SDI terminal, the signal is converted to 60i using the 2:3 pulldown method. An external device can receive the data used in this conversion (2:3 pulldown data) to convert the signal to 1080/24P specifications.