Handling Precautions
Handling Precautions
Camcorder
168Be sure to observe the following precautions to ensure maximum performance.
•Do not carry the camcorder by the LCD panel. Be careful when closing the LCD panel.
•Do not leave the camcorder in places subject to high temperatures (like the inside of a car parked under direct sunlight), or high humidity.
•Do not use the camcorder near strong electromagnetic fields such as above TVs, near plasma TVs or mobile phones. Using the camcorder in such places may cause anomalies in the video or audio or video noise to appear.
•Do not use or store the camcorder in dusty or sandy places. The camcorder is not waterproof – avoid also water, mud or salt. If any of the above should get into the camcorder it may damage the camcorder and/or the lens.
•Do not point viewfinder lens at the sun or other strong light sources. Do not leave the camcorder pointed at a bright subject. Internal components may become damaged due to concentration of the light by the lens. Be careful especially when using a tripod or shoulder strap.
•Be careful of heat generated by lighting equipment.
•Do not disassemble the camcorder. If the camcorder does not function properly, consult qualified service personnel.
•Handle the camcorder with care. Do not subject the camcorder to shocks or vibration as this may cause damage. When using the shoulder strap, do not allow the camcorder to swing and hit an object.
• When mounting the camcorder on a tripod, make sure that the tripod’s fastening | 5.5 mm | |
screw is shorter than 5.5 mm (0.2 in.). Using other tripods may damage the | ||
| ||
camcorder. |
|
If you do not intend to use the camcorder for a long time, store it in a place free of dust, in low humidity, and at temperatures not higher than 30 °C (86 °F).
Battery Pack
DANGER!
Treat the battery pack with care.
•Keep it away from fire (or it might explode).
•Do not expose the battery pack to temperature higher than 60 °C (140 °F). Do not leave it near a heater or inside a car in hot weather.
•Do not try to disassemble or modify it.
•Do not drop it or subject it to shocks.
•Do not get it wet.
•Dirty terminals may cause a poor contact between the battery pack and the camcorder. Wipe the terminals with a soft cloth.