Using the Focal Length Guide
Using the Focal Length Guide
The focal length guide aids you when using two camcorders for 3D recording. The guide appears as a numerical value and has a range of 154 steps. You can set the guide to 0 at any point in the zoom range to help precisely
96 calibrate both camcorders. Operating modes: 
1 Set up two camcorders and align their picture angle.
2 Open the [Focal Length Guide] submenu.
[lCamera Setup]
[lCamera Setup] 
[Zoom] 
[Focal Length Guide]
3 Select [Set To 0] and then press SET.
•The focal length guide appears on the left side of the screen as [z±0]. To turn off the indicator, select [Off] instead.
•You can obtain more accurate results by performing this step at full telephoto.
[Zoom]
[Focal Length Guide]
•If both camcorders are set so that the same value is displayed during zoom, the focal length for both camcorders will be maintained.
NOTES
•Although the focal length guide is an aid for 3D recording, make sure to check the picture angle visually while recording.