Clip Operations
Copying Clips
You can copy clips from one CF card to the other. The copied clips will retain their original name.
Copying a Single Clip | 119 |
1Select the desired clip and then press SET to open the clip menu.
2 Select [Copy Clip] and then press SET.
•The clip information screen appears and it prompts you to confirm the operation. 3 Select [OK] and then press SET.
•Select [Cancel] instead to cancel the operation.
•While the clip is being copied, you can press SET to cancel.
4When the confirmation message appears, press SET.
• The selected clip is copied to the other CF card and the screen changes back to the clip index screen.
Copying All Clips
1Open the [Copy All Clips] submenu.
[JOther Functions] 
[Clips] 
[Copy All Clips]
2Select [OK] and then press SET.
•All of the clips on the selected CF card will be copied to the other CF card.
•Select [Cancel] instead to cancel the operation.
•While the clips are being copied, you can press SET to cancel.
3 When the confirmation message appears, press SET.
[JOther Functions]
[Clips]
[Copy All Clips]
Copying All Clips with an eMark
1Open the [Copy eClips] submenu.
[JOther Functions] 
[Clips] 
[Copy eClips]
2Select [OK] and then press SET.
•All of the clips with an emark on the selected CF card will be copied to the other CF card.
•Select [Cancel] instead to cancel the operation.
•While the clips are being copied, you can press SET to cancel.
3 When the confirmation message appears, press SET.
[JOther Functions]
[Clips]
[Copy eClips]
IMPORTANT
•Observe the following precautions while the CFjor CFlaccess indicator is illuminated in red. Failure to do so may result in permanent data loss.
-Do not disconnect the power source or turn off the camcorder.
-Do not open the cover of the either CF card slot.
NOTES
•You cannot copy a clip if either CF card slot cover is open.
•If a clip is being copied to a card that already has a clip with the same number (the