Troubleshooting

File name error

-The folder and file numbers have reached their maximum value. Set [Other Functions] [Photo Numbering] to [Reset] and delete all the photos on the SD card (0141) or initialize it (037).

Invalid operation

167

- The following operations cannot be performed.

•Adding a shot mark to a frame that already has a shot mark or to a clip in frame recording mode or interval recording mode.

•Adding an emark to clip that already has an emark or adding a Zmark to a clip that already has a Zmark.

•In mode, immediately reviewing a recording made in a special recording mode.

•Pressing the START/STOP button when there is no CF card in the camcorder.

Media full

- CF card A and CF card B are full. Delete some clips (0120) to free some space or replace a CF card.

Media is almost full

- The amount of available space on CF card A and CF card B combined is low. Replace the CF card that is not selected.

No clips

- There are no clips on the CF card to play back. Clips must be recorded (040) in order to play them back.

No photos

- There are no photos on the SD card to play back. Photos must be taken (0138) in order to view them.

No Shot Marks

-This message appears if shot marks in a clip were deleted from the [Shot Mark] index screen. Press the INDEX button to return to the clip index screen.

Number of Shot Marks at maximum

-The shot mark could not be added because the clip already contains 100 shot marks (cand dmarks combined). You must delete shot marks (0123) before adding any more.

Recorded in PAL standard Check data on CF A/CF B and initializing the card is recommended

-The CF card contains clips that are recorded in the PAL system. Save your clips (0131) and initialize the CF card (037).

SD card error

- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended SD card (035).

Shot Mark Error

-Could not add a shot mark. If the message appears in mode, try adding the mark again. If that does not work,

add the mark in mode after you finish recording. If the message appears in mode, turn off the camcorder and then back on. Then, try to add the mark again.

System error

-Turn off the camcorder and back on again. If this does not solve the problem, there may be a malfunction with the camcorder. Consult a Canon Service Center.

This photo cannot be displayed

- You may not be able to display photos taken with other devices or image files created or edited on a computer.

ZMark Error

-Could not add a Zmark. If the message appears in mode, try adding the mark again. If that does not work,

add the mark in mode. If the message appears in mode, turn off the camcorder and then back on. Then, try to add the mark again.

eMark Error

-Could not add an emark. If the message appears in mode, try adding the mark again. If that does not work,

add the mark in mode. If the message appears in mode, turn off the camcorder and then back on. Then, try to add the mark again.