Preparing the Power Supply
Attaching the Battery Pack
1 Move the dswitch to OFF ().
2 Insert the battery pack all the way into the compartment and press gently until it clicks ().
Removing the Battery Pack
1 Move the dswitch to OFF.
2Hold down the BATT. RELEASE (battery release) key and remove the battery.
Checking the Remaining Battery Charge
If you are using the supplied 
Pack, you can check the approximate remaining battery charge using one 
of the following methods when the camcorder is turned off. When the 
camcorder is turned on, you can check on the remaining battery charge by 
looking at any recording/playback screen or the [Battery / Hour Meter] 
status screen (0160).
23
CHECKbutton
Press the CHECK button on the battery pack. An indicator will light for approximately 3 seconds and show the approximate remaining battery charge.
0 
100% 
Battery charge indicator