Color Bars/Audio Reference Signal
Color Bars/Audio Reference Signal
You can have the camcorder generate and record color bars and a 1 kHz audio reference signal and output |
|
them from the HD/SD SDI terminal (bonly), HDMI OUT terminal, HD/SD COMPONENT OUT terminal1, AV | 83 |
terminal and W(headphone) terminal2. |
1Outputs color bars only.
2Outputs audio reference signal only.
Operating modes: 
Recording Color Bars
You can choose between SMPTE
1 Open the color bars [Type] submenu.
[lCamera Setup] 
[Color Bars] 
[Type]
2 Select [Type 1] (SMPTE) or [Type 2] (ARIB) and then press SET. 3 Open the [Enable] submenu to activate the color bars.
[lCamera Setup] 
[Color Bars] 
[Enable]
4 Select [On] and then press SET.
•The selected color bars appear on the screen and will be recorded when you press the START/STOP button.
•Turning the camcorder off or changing the operating mode to 
mode will deactivate the color bars.
•Alternatively, you can set an assignable button to [Color Bars] (097) to activate the color bars.
[lCamera Setup]
[Color Bars]
[Type]
[Type 1]
[lCamera Setup]
[Color Bars]
[Enable]
[Off]
Recording an Audio Reference Signal
The camcorder can output a 1 kHz audio reference signal with the color bars.
1 Open the [1 kHz Tone] submenu.
[mAudio Setup] 
[Audio Input] 
[1 kHz Tone]
2 Select the desired level and then press SET.
•Available levels are
•Select [Off] to turn off the signal.
[mAudio Setup]
[Audio Input]
[1 kHz Tone]
[Off]
• The signal is output at the selected level and will be recorded when you press the START/STOP button.