WARNING! If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.
WHAT TO DO IF YOU SMELL GAS
•Do not try to light any appliance
•Do not touch any electrical switch
•Do not use any phone in your building
•Immediately call your gas supplier from a neighbors phone. Follow the gas supplier’s instructions.
•If you can not reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency or the gas supplier.
The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system test pressures in excess of 5 psi (35 kpa).
The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal or less than 5 psi (35 kpa).
WARNING! Disconnect Power before installing. Before turning power ON, be sure that all controls are in the OFF.
IMPORTANT! Installation must conform with local codes or, in the absence of local codes, with the National fuel Gas Code, ANSI Z223.1/NFPA 54.
•Smother flames with a close fitting lid, or any metal tray.
•Turn OFF the burner. Be careful to prevent burns. If the flames do not extinguish, immediately evacuate and call the fire department.
•NEVER pick up a flaming pan. By doing so, you may be burned.
•DO NOT use water or a wet dishcloth on fire. A violent steam explosion will result. Use a fire extinguisher only if:
•You have CLASS ABC extinguisher and you know how to operate it.
•The fire is small and contained in the area where it started.
•The fire department has been called.
•You can fight the fire with your back to the exit.
FOR YOUR SAFETY! If You Smell Gas:
Shut off gas to the appliance. Extinguish any open flames. If odor persists, immediately call your gas supplier.
This appliance was designed for ease of installation and operation. However, we recommend that you read all sections of this manual before beginning installation and that your range is installed by an approved gas installation technician capable of reviewing and performing the manufacturers installation checklist included in your information packet.
The installation of appliances assigned for manufactured (mobile) home installation must conform with the Manufactured Home Construction and Safety and Safety Standard, Title 24 CFR, Part 3280 or, when such standard is not applicable, the Standard for Manufactured Home Installations, ANSI/NCSBCS A225.1, or with local codes as applicable.
The installation of appliances designed for Recreation Park Trailers must conform with state or other codes or, in the absence of such codes, with the standard for Recreational Park Trailers, ANSI A119.5.
The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National
W A R N I N G S !
Electrical Code, ANSI/NFPA 70
WARNING! If the information in this manual is not followed exactly, a fire or explosion may result, causing property damage, personal injury or death. Please read the installation, operating and maintenance instructions thoroughly before use.
IMPORTANT! All ranges must be installed with a
CAUTION! When connecting the unit to propane gas, make certain the propane tank is equipped with its own
CAUTION! Do not store or use gasoline or any other flammable liquids in the vicinity of this or any other appliance.
PLEASE RETAIN THIS
MANUAL FOR FUTURE
REFERENCE!
PLEASE NOTE:
In the Commonwealth of Massachusetts, gas connection must be performed by a licensed plumber or licensed gas fitter.
