Table 2 — Physical Data

19EA Pumpout Unit

ENGLISH (SI)
Pumpout Unit Weight* lb (kg) 210 (95)
Pumpout Condenser WaterFlow Rate gpm (L/s) 5 to 7 (.32 to .44)
Pumpout Condenser WaterPressure Drop psig (kPa) 6 to 10.7 (41.4 to 73.8)
Maximum Entering Condenser WaterTemperature F(C) 85 (29)
Maximum Leaving Condenser WaterTemperature F (C) 100 (37)
Condenser Relief Valve(Fusible Plug) psig(kPa) 385 (2655)
Condenser Pressure Rating
Refrigerant Side psig (kPa) 385 (2655)
Waterside psig (kPa) 150 (1034)
Compressor Rating 1750 rpm (29 r/s) Reciprocating cfm(L/s) 8.7 (.25)
Valves(4-Valve Manifold, Copper with
Brass TurnKnob Valves) in. OD
1
⁄
21
⁄
2
*The pumpout unit weight includes the compressor/condenser,control box, and the oil separator.
NOTES:
1. The motor is hermetic with thermal protection.
2. The control box is mounted and wired with a fuse on/off switch according to NEMA 1 (National
Electrical Manufacturing Association).
3. The starter contactor is located in the control box. The overloads on the motor are wired and the
disconnect switch is supplied by the customer.
4. The condenser tube is copper.
Fig. 4 — Rigging Guide
STORAGE
TANKSIZE
CENTER OF GRAVITY
APPROX. DIM. — ft-in. (mm) EMPTY WEIGHT
LB (Kg)
AB
28 Ft
3
4- 5
1
⁄
4
(1353) 1-7
7
⁄
8
(505) 2380
(1080)
52 Ft
3
6-10
1
⁄
8
(2086) 1-8
3
⁄
4
(527) 3460
(1569)
NOTES:
1. Eachchain must be capable of supporting the entire weight of the
machine.
2. Minimum chain length:
28 ft
3
tank — 108-09
52 ft
3
tank — 158-69
3. Total weight equals empty weight from chart and charge weight
given on label.
6