Carrier 19XRV specifications A19-1831, A19-1842, A19-1814

Opening the VFD Access Door

WARNING

Before removing the drive enclosure, open access door and verify that the DC bus voltage has dropped to zero by checking the terminals behind the access door. Failure to observe this precaution could result in severe bodily injury or loss of life.

1.Using recommended screwdriver = 6.4 mm (0.25 in.) flat or T20 star, open access door. See Fig. 2.

2.Check to be sure that the voltage between DC+ and DC- and from each DC terminal to the chassis is zero before proceeding. See Fig. 3.

Drive Assembly Catalog Number — See Fig. 4 for an example Catalog Number.

Components and Physical Data — The Allen- Bradley PF755 Frame 6 drive is used for the 230-amp rated ap- plication (carrier Part No. 19XRV0230...). See Fig. 5.

The Allen-Bradley PF755 Frame 7 drive is used for the

335-amp and 445-amp rated application (Carrier Part No. 19XVR0335... and 19XVR0445... respectively). See Fig. 6.

See Fig. 7 for the dimensions of Frames 6 and 7.

Fig. 2 — Opening Access Door

A19-1831

1 L1 L2 L3 I

LOCKOUT/TAGOUT

O

2 0V

DC BUS TEST	DC+ DC–
TERMINALS
LOCATED INSIDE
ACCESS DOOR

0V MULTIMETER

A19-1842

21P 1 0248

21P PF755 VFD

Voltage Rating

1– 460 to 480 v, 60 Hz

2– 380 to 415 v, 50 Hz

3 – 380 to 400 v, 60 Hz 4– 401 to 439 v, 60 Hz

PF755 Full Load Amp Rating (Maximum Continuous Amps)* 0248 – 248 0361 – 361

0477 – 477

*For Carrier applications, maximum continuous amp ratings are 230, 335, and 445.

Fig. 3 — Check DC Bus Terminals

A19-1814

3 - 3 - 0 - 0 - C

Customer

C– Carrier

Meter Package

0 – No Meter Package

1– Analog Meter Package

Input Reactor

0 – No Input Reactor

1– 3% Input Line Reactor

Disconnect/Breaker Options

3 – 65 KAIC Capacity Breaker

4– 100 KAIC Capacity Breaker

Drive Assembly

3 – Unit Mount NEMA 1 Liquid Cooled

Fig. 4 — Drive Assembly Catalog Number Nomenclature

3