Carrier Application data cont, a23-1647, 23XRV ISOLATION WITH ACCESSORY SOLEPLATE PACKAGE

Application data (cont)

23XRV ISOLATION WITH ACCESSORY SOLEPLATE PACKAGE

TYPICAL ISOLATION STANDARD ISOLATION

ELASTOMERIC PAD

VIEW Y-Y

ISOLATION WITH ISOLATION PACKAGE ONLY

(STANDARD)

NOTE: Isolation package includes 4 elastomeric pads.

a23-1647

ACCESSORY SOLEPLATE DETAIL

VIEW X-X

NOTES:

1.Dimensions in ( ) are in millimeters.

2.Accessory soleplate package includes 4 soleplates, 16 jacking screws and leveling pads. Requires isolation package.

3.Jacking screws to be removed after grout has set.

4.Thickness of grout will vary, depending on the amount necessary to level chiller. Use

only pre-mixed non-shrinking grout, Ceilcote 748 or Chemrex Embeco 636 Plus Grout, 0′-11/2″(38.1) to 0′-21/4″(57) thick.

5.Service clearance under the chiller is enhanced if leveling pads are not extended along the entire length of the heat exchangers.

18