Selecting and Playing a Tone 
To adjust the metronome volume
NOTE
•You can perform the following procedure at any time, regardless of whether or not the metronome is sounding.
1.
2.
3.
Press the TEMPO/SETTING button.
• This will cause the lamp above the button to flash.
Press the METRONOME VOLUME button.
• This will cause the lamp above the button to flash.
Use the 
/NO and 
/YES buttons to change the metronome volume in the range of 0 to 42.
4. Press the TEMPO/SETTING button again.
• This will cause the lamp above the button to go out.