Connecting to a Computer

2. Use a commercially available USB cable (A-B type) to connect the digital piano to the computer.

IMPORTANT!

•Make sure that the digital piano is turned off before connecting or disconnecting the USB cable to it.

Computer

USB port USB cable (A-B type)

USB connector

Digital piano USB port

*1 You need to have Adobe Reader or Acrobat Reader installed on your computer in order to view the contents of the “CASIO USB MIDI Driver User’s Guide” (manual_e.pdf). If your computer does not have Adobe Reader or Acrobat Reader installed already, use the procedure below to install it.

To install Adobe Reader (Acrobat Reader*2)

1. Place the CD-ROM that comes with the digital piano into your computer’s CD-ROM drive.

2. On the CD-ROM, navigate to the “Adobe”/ “English” folder and double-click “ar601enu.exe” (or “ar505enu.exe*2”). Follow the instructions that appear on your computer screen to install the driver.

*2 Adobe Reader cannot be installed using the “ar601enu.exe” file on a computer running Windows 98. If your computer is running Windows 98, click “ar505enu.exe” to install Acrobat Reader.

Minimum Computer System Requirements

Supported Operating Systems

Windows® XP Professional, Windows® XP Home Edition, Windows® 2000 Professional, Windows® Me, Windows® 98SE, Windows® 98

Driver Minimum Computer System

Requirements

The following are the minimum computer system requirements for running the USB MIDI driver.

zUniversal

•IBM AT or compatible computer

•USB port that provides normal operation under Windows

•CD-ROM drive (for installation)

•At least 2MB of free hard disk space (not including space required for Acrobat Reader)

zWindows XP

•Pentium 300MHz or higher

•128MB minimum memory

zWindows 2000

•Pentium 166MHz or higher

•64MB minimum memory

zWindows Me, Windows 98SE, Windows 98

•Pentium 166MHz or higher

•32MB minimum memory

USB Mode and MIDI Mode

Your digital piano has two data communication modes: a USB mode and a MIDI mode.

The digital piano will enter the USB mode automatically whenever a connection is established between it and the USB driver running on a connected computer. If there is no computer connected to the USB port, the digital piano will enter the MIDI mode.

zUSB Mode

USB enabled

The above indicator appears for about three seconds after a USB connection is established. For details about using the MIDI device functions in the USB mode, see the “CASIO USB MIDI Driver User’s Guide” (manual_e.pdf) on the bundled CD-ROM.

E-31