Assembling the Stand

3. First secure the sides of the back panel with the two I screws on the left and right.

At location 4, slip the G clip onto to the I screw before installing the screw.

With back panel C resting on top of the feet 5 of side panels A and B, press the back panel against crosspiece D as you install the I screws.

6. Mound the piano onto the stand.

Use the H butterfly bolts to secure the piano to the stand.

4

G

I

I

7

7

H

5

4. Next, secure the bottom of the back panel C with the six F screws.

B

(Back)

A

C

F

5. Adjust the height adjustment screw 6 to provide support so crosspiece D does not bow downwards when the pedals are pressed.

6

IMPORTANT!

Pressing the pedals without adjusting height adjustment screw 6 can result in damage to crosspiece D. Always make sure you adjust height adjustment screw 6 before operating the pedals.

H

After ensuring that the screws on the bottom of the piano hook into the cut outs in the stand brackets 7, secure the piano with the H butterfly bolts.

Back

7H

Front

The butterfly bolts keep the piano from slipping off the stand. Never use the piano without the butterfly bolts installed.

E-41