Using an SD Memory Card
•Never insert anything besides an SD memory card into the SD memory card slot. Doing so creates the risk of malfunction.
•Inserting an SD memory card that carries an electrostatic charge into the SD memory card slot can cause malfunction of the digital piano. If this happens, turn the digital piano off and then back on again.
•An SD memory card can become quite warm after very long use in the SD memory card slot. This is normal and does not indicate malfunction.
•An SD memory card has a limited service life. After very long use, you may start to experience problems with storing data to, or reading or deleting data from the memory card. When this happens, you need to purchase a new SD memory card.
*Note that CASIO COMPUTER CO., LTD. shall not be held liable for any loss of data stored on an SD memory card.
Using an SD Memory Card with the Digital Piano
When using an SD Memory card, first be sure to format the memory card on the digital piano. For details, see “Formatting an SD Memory Card” on page
Inserting and Removing an SD Memory Card
IMPORTANT!
•Note that the SD memory card must be oriented correctly when you insert it into the SD memory card slot. Trying to force the memory card into the slot can damage the card and the slot.
•Never remove the SD memory card from the card slot or turn off the digital piano while any data access operation (save, recall, format) is being performed. Doing so can corrupt the data on the memory card and damage the SD memory card slot.
■To insert an SD memory card
1. With the SD memory card facing upwards as shown in the illustration, angle the card downwards as you insert it into the SD memory card slot.
•Push the card into the slot until you hear it click into place.
Front
■To remove an SD memory card
IMPORTANT!
•Before removing the SD memory card, check to make sure that the lamp above the CARD button is not lit. If the lamp is lit or flashing, it means that the card is being accessed, and that you should not remove it.
1. Press the memory card into the slot slightly and then release it.
•This will cause the memory card to disengage and eject partially.
2.Pull the memory card out of the slot.