Other Settings
To change the setting of one of the | To change the setting of one of the |
EFFECT button parameters | OTHERS button parameters |
Pressing the EFFECT button in step 3 of the | Pressing the OTHERS button in step 3 of the |
“Configuring settings” procedure will toggle between | “Configuring settings” procedure will cycle between |
the two parameters shown below. | the parameters shown below. |
DSP parameter | |
(“d” stands for “DSP”.) | (“P” stands for |
Acoustic Resonance parameter | Local Control setting |
(“A” stands for “Acoustic”.) | (“L” stands for “Local”.) |
NOTE
•While the keyboard is layered, the DSP on/off setting affects the layered tone only. While the keyboard is split, the DSP on/off setting affects the low range tone only.
•Turning on DSP will apply the DSP effect to tones with DSP only. It will not be applied to any other type of tone.
•Turning on Acoustic Resonance will apply the Acoustic Resonance effect to tones that support Acoustic Resonance only. It will not be applied to any other type of tone.
To change the setting of one of the MIDI button parameters
Pressing the MIDI button in step 3 of the “Configuring settings” procedure will cycle between the parameters shown below.
Send Channel setting (“C” stands for “Channel”.)
Accomp MIDI Out setting (“o” stands for “out”.)
MIDI In Chord Judge setting (“J” stands for “Judge”.)