Assembling the Stand
Unpacking
PREPARATION
•Before starting assembly, check to make sure that you have all the parts shown below. You can find the screws in a plastic bag inside of the polystyrene foam packing material.
•This stand does not include any of the tools required for assembly. It is up to you to prepare a large Philips head
(+) screwdriver for assembly.
A
C
B
D
Part | Size (mm) | Qty |
E | 6 × 20 | 4 |
F | 3.5 × 16 | 6 |
G | — | 1 |
H | 6 × 14 | 2 |
I | 4 × 16 | 2 |
J | — | 1 |
K | 6 × 20 | 1 |
L | — | 4 |
IMPORTANT!
•If anything is missing or damaged, contact your local CASIO service provider.
•Note that use of any unauthorized parts or components can cause damage to the stand and/or the digital piano.
zBefore starting stand assembly, unfasten the band 1 that bundles the pedal cable in the back of crosspiece D, and extend the cable.
1
CAUTION
•This stand should be assembled by two people working together.
•This stand should be assembled on a flat surface.
•Do not remove the tape securing the keyboard cover in place until assembly is complete. Removing the tape can cause the keyboard cover to open and close during assembly, creating the risk of personal injury to your hands and fingers.
•Take care that you do not pinch your fingers between parts when assembling them.
To assemble the stand
1. Attach side panels A and B to crosspiece D. Secure the side panels using four E screws.
•When installing part 2, slide the brackets 3 into the slots in either end crosspiece D. If the brackets 3 are not inserted into the ends of the crosspiece D as far as they will go, the E screws will not be able to enter into the screw holes of the brackets 3, which can strip the threads of the screws.
•Cover the screw heads with the caps L.
EL
L
A 
E
L
D
E 
3B
2
2. Slide back panel C into the grooves of the side panels ().
C