Assembling the Stand

To connect cables

1. Orienting the pedal plug as shown in the illustration, plug it into the pedal connector on the bottom of the piano.

Secure the pedal cord with the clip.

Pedal plug

Clip

2. Check to make sure that the POWER button is in the OFF position (raised). If power is on, press the POWER button to turn it off.

3. Plug the power cord that comes with the digital piano into the AC power jack on the bottom of the digital piano.*

*AP-500V only

Power Cord

IMPORTANT!

The shape of the power cord plug and household power outlet receptacle differ according to country and geographical area. The illustration shows just one example of the shapes that are available.

The power cord of the AP-500 is hard-wired to the digital piano.

4. Plug the power cord into a household power outlet.

Household power outlet

CAUTION

The screws of the stand can work loose due to the effects of temperature and humidity changes, vibration, etc. Because of this, you need to periodically check the screws for proper tightness. Retighten any loose screws you find.

To power the digital piano, use a power outlet that allows easy access when plugging in or unplugging the power cord.

E-42