Geometry Application Overview
Starting Up the Geometry Application
Use the following procedure to start up the Geometry application.
u ClassPad Operation
On the application menu, tap G.
This causes a blank Geometry application window to appear.
Use this area to draw the figures you want.
Tip
•If you left figures on the Geometry window the last time you exited the Geometry application, those figures will appear the next time you start it up.
Geometry Application Menus and Buttons
This section describes the configuration of the Geometry application windows and provides
basic information about its menus and commands.
Tip
•Omenu items are the same for all applications. For more information, see “Using the O Menu” on page
•The View Window (O- [Settings] - [View Window]) contains settings that are unique to the Geometry application. For details, see “Configuring View Window Settings” on page
kFile Menu
To do this | Select this File menu item: |
Discard the current window contents and create a new file | New |
Open an existing file | Open |
Save the current window contents to a file | Save |
20021201