Example: To pause a graphing operation and then resume it
u ClassPad Operation
(1)Use the Graph & Table application to draw a graph.
•For details about graphing, see “Chapter 3 – Using the Graph & Table Application”.
(2)While the graph is being drawn, press the Kkey.
•This pauses the draw operation and displays 
on the right side of the status bar.
Draw is paused at the point where Kis pressed.
(3)To resume the operation, press the Kkey again.
•This resumes the draw operation, which continues until the graph is complete.
kTerminating an Operation (Break)
Pressing the ckey while an expression processing, graphing, or other operation is being performed terminates the operation.
Example: To terminate a graphing operation
u ClassPad Operation
(1)Use the Graph & Table application to draw a graph.
•For details about graphing, see “Chapter 3 – Using the Graph & Table Application”.
(2)While the graph is being drawn, press the ckey.
•This terminates the draw operation and displays the Break dialog box, indicating the Break state.
Break dialog box
(3)To exit the Break state, tap the [OK] button.
• This returns the ClassPad to its status before you started the graphing operation.
20021201