Connecting the ClassPad to Another Device
15-2 Connecting the ClassPad to Another Device
This section provides detailed explanations about how to connect the ClassPad to another ClassPad unit, to a computer, and to a CASIO Data Analyzer.
Connecting to Another ClassPad Unit
Use the procedure below to connect two ClassPad units.
k Required Hardware
ClassPad: 2 units
Special
u ClassPad Operation
(1)Turn both units off.
(2)Remove the connector covers from the
(3)Connect the data communication cable as shown in the illustration below.
• Insert both of the plugs securely, as far as they will go.
Cable
•For information about what you should do to transfer data, see
Tip
•Be sure that you do not misplace or lose the connector covers.
•To protect against dirt, dust, and static electricity, be sure to replace the connector covers whenever the cable is not connected.
20021201