15-2-2

Connecting the ClassPad to Another Device

Connecting to an EA-200 Data Analyzer

You can use the CASIO Data Analyzer to sample and collect data on various everyday natural phenomena. You can also connect the Data Analyzer to your ClassPad, and control Data Analyzer operation from your ClassPad. You can transfer setup information from the ClassPad to the Data Analyzer, trigger sampling from the ClassPad, and graph sample results on your ClassPad.

k Required Hardware

ClassPad: 1 unit

EA-200 Data Analyzer: 1

Special SB-62 Cable: 1

u ClassPad Operation

(1)Turn off the ClassPad and Data Analyzer.

(2)Remove the connector cover from the 3-pin communication port of the Data Analyzer, and connect one end of the data communication cable to the port.

(3)Remove the connector cover from the 3-pin communication port of the ClassPad, and connect the other end of the data communication cable to the port.

Ready Sampling

Error

Batt

Power

SET UP

 

 

START/STOP

Cable

•For information about what you should do to transfer data, see the user documentation that comes with the Data Analyzer.

Tip

•Be sure that you do not misplace or lose the connector covers.

•To protect against dirt, dust, and static electricity, be sure to replace the connector covers whenever the cable is not connected.

20021201