3
Getting Ready
u ClassPad Operation
(1)Using a clean dry cloth, wipe the touch screen clean of any dirt, dust, or other foreign matter.
(2)Peel the green colored film from the back of the protector.
Film
Film
Tape
Pull
Pull
•If you have a hard time peeling the film from the protector, use a piece of tape as shown in the illustration above.
•Do not touch the surface of the protector that is exposed when you peel off the film.
(3)With the exposed surface of the protector facing the ClassPad touch screen, insert the tabs on the top, bottom, left, and right edges of the protector into the slots along the edges of the touch screen.
Note
The upper and lower right corners of the screen protector are bent to keep the screen protector from moving while it is installed on the ClassPad. Do not change the bend of these corners either by pressing them down or flattening them out. Doing so will cause movement of the screen protector while it is installed on the ClassPad.
Make sure the exposed surface is facing the touch screen.
•Be careful so that no dirt, dust, or other foreign matter gets between the touch screen and protector. Foreign matter can cause damage to the touch screen as you use the ClassPad.
2003020121