Shooting a Snapshot
Snapshot mode icon
Operation Lamp
Shutter Button
Focus Frame
Monitor Screen
[
] (REC)
(page 62)
1.Press [
] to turn on the camera.
This enters a REC mode and displays “ 
” (Snapshot mode icon) on the monitor screen.
•If “ 
” does not appear on the monitor screen, you need to select Snapshot as the recording mode “ 
(Snapshot)” (page 62).
2.Point the camera at the subject.
3.While taking care to keep the camera still, half- press the shutter button.
When the image is in focus, the camera will beep, the operation lamp will light green, and the focus frame will turn green.
4.Continuing to keep the camera still, press the shutter button all the way down.
The recorded image will remain on the display for about one second, and then it will be stored in memory. After that, the camera will be ready to shoot the next image.
15
QUICK START BASICS