4.Use [S] and [T] to select the setting you want, and then press [SET].
To get this: | Select this setting: |
|
|
+2
Brighter
+1
0
Darker
•To cancel the brightness adjustment operation, press [W] or [MENU].
IMPORTANT!
• Adjusting the brightness of an image creates a new image |
Reducing the Effects of
Underexposure
You can use the following procedure to reduce underexposure only, while maintaining the bright areas of an image.
1.In the PLAY mode, use [W] and [X] to select the image you want to correct.
2.Press [MENU].
3.On the “PLAY” tab, select “Dynamic Range”, and then press [X].
4.Use [S] and [T] to select the setting you want and then press [SET].
with the new brightness level. The original image also |
remains in memory. |
• |
When you want to do this:
Select this setting:
When you display a brightness adjusted image on the |
Apply Dynamic Range to a greater
camera’s monitor screen, the date and time indicates when |
the image was originally recorded, not when the brightness |
extent than “Expand +1”
Expand +2
was adjusted. |
|
|
|
|
Reduce underexposure | Expand +1 |
|
|
188
EDITING IMAGES