■Playing a Slideshow on the USB Cradle (Photo Stand)
You can play a slideshow on the camera while it is mounted on the USB cradle. This is a good way to enjoy a long slideshow, without worrying about the camera’s battery going dead.
•Configure slideshow settings (page 164) before performing the steps below.
•Connect the bundled AC adaptor to the USB cradle, and plug it into a power outlet.
1.Turn off the camera and place it onto the USB cradle.
2.Press the USB cradle’s
[PHOTO] button to start the slideshow.
The slideshow is performed in |
|
accordance with the settings |
|
you configured with the |
|
procedure on page 164. The | [PHOTO] |
camera will turn off |
|
automatically after the time you specified with the “Time” setting elapses.
•You can change the slideshow setting by pressing [MENU] while a slideshow is in progress. After configuring the settings, press [MENU] again to restart the slideshow.
•To adjust the level of audio volume during a slideshow, use [S] and [T] to adjust the volume.
169
VIEWING SNAPSHOTS AND MOVIES