■Using Edit Family to Assign a Priority Level to Recorded Face Data
After recording face data, you can assign a name and a priority level that controls how the data is applied when shooting a snapshot.
1.Enter a REC mode.
2.Press [S] ( 
) once.
3.Use [W] and [X] to select “
Edit Family” and then press
[SET].
This display the face data editing screen.
4.Use [S], [T], [W], and [X] to select the face data you want to edit, and then press [SET].
5.Use [W] and [X] to select a name, and then press [T].
•You can select any one of 12 preset names to face data.
6.Use [W] and [X] to select the priority level you want and then press [SET].
•You can select any one of four levels, from “ 
”
(Lowest) to “ 
” (Highest). Selecting “ 
” (Disabled) will disable face recognition.
96
SHOOTING A SNAPSHOT