Deleting recorded face data
Perform the following steps when you want to delete recorded face data.
1.Enter a REC mode.
2.Press [S] ( 
) once.
3.Use [W] and [X] to select “
Edit Family” and then press [SET].
4.Press [MENU].
5.Use the procedures under “Deleting a Specific File” (page 205) and “Deleting All Files” (page
206) to delete the face data you want.
•You can exit this procedure by pressing [MENU].
NOTE
•Formatting the camera’s
■Shooting a Snapshot using Recorded and Edited Face Data
After you record and edit face data, you can use it to shoot photographs. The camera will record images in accordance with the priority levels you configured for each set of face data.
1.Enter a REC mode.
2.Press [S] (
) once.
3.Use [W] and [X] to select “ 
Face Recognition: Family First” and then press [SET].
4.Point the camera at the subjects.
The camera will detect the faces of the people whose face data has been saved in camera memory. The detected faces all will be
bounded by frames after detection is complete.
•The frames will be colored according to the priority level of the face: White (lowest), yellow, or green (highest). A green frame indicates the highest priority face when the image is recorded.
97
SHOOTING A SNAPSHOT