Specifying the File Name Serial Number Generation Rule
Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 198).
1.Press [MENU].
2.On the “Set Up” tab, select “File No.” and then press [X].
3.Use [S] and [T] to select the setting you want and then press [SET].
| Select |
To have the camera do this: | this |
| setting: |
Remember the numbers used for files. Files will |
|
be named using the next sequential number, |
|
even if files are deleted or if a blank memory card |
|
is loaded. |
|
• If a memory card is loaded that already has |
|
files stored on it and the largest sequential | Continue |
number in the existing file names is greater |
|
than the largest sequential number |
|
remembered by the camera, numbering of new |
|
files will start from the largest sequential |
|
number in the existing file names plus 1. |
|
|
|
Restart the serial number from 0001 whenever all |
|
files are deleted or when the memory card is |
|
replaced with a blank one. |
|
• If a memory card is loaded that already has | Reset |
files stored on it, numbering of new files will |
|
start from the largest sequential number in the |
|
existing file names number plus 1. |
|
|
|
210
OTHER SETTINGS