NOTE
•You can use the camera’s USB cradle to connect to a DVD recorder or video deck and record images from the camera. There are various different methods you can use in order to connect to another device when recording images. The following describes one method for connection using the AV cable that comes with the camera.
–DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals.
–USB cradle: Connect to the [AV OUT] (AV output port)
–Camera: Place onto the cradle
You can play a slideshow of snapshots and movies on the camera and record it on a DVD or video tape. You can
■Selecting the Screen Aspect Ratio and Video Output System
You can use the procedure in this section to select either NTSC or PAL as the video output system. You can also specify an aspect ratio of 4:3 or 16:9.
1.Press [MENU].
2.On the “Set Up” tab, select “Video Out” and then press [X].
3.Use [S] and [T] to select the setting you want and then press [SET].
record movies by selecting “ 
Only” for the slideshow “Images” setting (page 165). When recording to DVD
For this type of TV:
Select this video output system:
recorder or video deck, you can turn off display information (page 58) so indicators and other information is not recorded along with the image.
Standard aspect ratio screen NTSC
NTSC 4:3
TV (Japan, U.S., and other countries)
Wide aspect ratio screen NTSC TV
To view the image that is being recorded, connect a TV or other monitor to the DVD recorder or video deck that is
(Japan, U.S., and other countries)
NTSC 16:9
Standard aspect ratio screen PAL TV
(Europe and other areas)
PAL 4:3
Wide aspect ratio screen PAL TV
connected to the camera. For information about connecting
amonitor to the DVD recorder or video deck and about how to record, see the user documentation that comes with the DVD recorder or video deck you are using.
(Europe and other areas)
PAL 16:9
172
VIEWING SNAPSHOTS AND MOVIES