Date Stamping Snapshots
You can have the snapshot’s recording date only, or date and time stamped in the lower right corner of the image.
1.In a REC mode, press [MENU].
2.On the “Set Up” tab, select “Timestamp” and then press [X].
3.Use [S] and [T] to select the setting you want and then press [SET].
Example: December 24, 2007, 1:25 p.m.
To do this: | Select this setting: | |
Display the date only (2007/12/24) | Date | |
|
| |
Display the date and time (2007/ | Date&Time | |
12/24 1:25pm) | ||
| ||
|
| |
Display nothing | Off | |
|
|
IMPORTANT!
•Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function and the printing software function (page 226).
•Once date and time information is stamped in a print, it cannot be edited or deleted.
•Use the “Date Style” setting (page 212) to specify the Year/ Month/Day format of the date.
•The recording date and time are determined in accordance with the camera’s clock settings (pages 11, 211) when the snapshot is recorded.
•Digital zoom is not supported while date stamping is turned on.
•Date stamping is not supported for the following types of images.
–Some BEST SHOT images (Auto Framing, Business cards and documents, White board, etc., Old Photo, ID Photo)
–Zoom Continuous Shutter
151
ADVANCED SETTINGS