Casio KL-7400 Barcode Specifications, NEW, SET, SET, SET, SET, SET, SET, PRINT, Check, Input, Check, Number, Example, BARCODE, Barcode, Printed, Digit*1, of Input

Example

■To create a barcode tape label

1.Press to turn on the printer.

2.Use and to select NEW, and then press SET.

3. Use the cursor keys to select , and then press SET.

•You also could press BARCODE in step 2 or 3 to enter the Barcode Mode.

4.Use and to select the type of bar code you want to print, and then press SET.

(ex. EAN-13)

5.Input 12 number of digits when you are using EAN-13 (7 digits, when using EAN-8), and then press SET.

6.Use and to select the barcode size, and then press SET.

7.Use and to select PRINT, and then press SET.

8.Use the number keys (or and ) to specify the number of copies,

and then press .

•You can specify a value from 1 to 100 for the number of copies.

9.Use and to select the tape cut mode (page 20), and then press SET.

•This starts the print operation.

•For information about saving tape label data, see page 45.

Barcode Specifications

Barcode	Check	Printed	Number	Automatically		Input
	Digit*1	Digits*2	of Input	Added Digits		Characters
			Digits*3
					Check
					Digit*1
EAN-13	Yes	13 digits	12 digits	–	1 digit	Numerals
EAN-8	Yes	8 digits	7 digits	–	1 digit	Numerals

*1 The check digit is automatically calculated in accordance with input data. For

EAN-13 and EAN-8, the check digit is appended at the end of the printed digits.

*2 The number of digits printed below a bar code equals the input characters plus automatically appended characters.

*3 An error message is displayed whenever there are insufficient digits. The printer will not allow input of too many digits.

35E