Casio KL-7400 Error Messages, SET, ESC, Message, Message, See page:, See page:, Cause and Action, Cause and Action

Error Messages

Message	Cause and Action	See page:
PRINTER NOT SHUT	• The last time the printer was	10, 11, 47
DOWN PROPERLY	used, the AC adaptor was
LAST TIME	disconnected or the batteries
	were removed while the
	printer was turned on or
	while PLEASE WAIT was
	displayed, so the printer
	could not power down
	properly. Because of this,
	some data in printer memory
	became corrupted.
	➜ Press any key to re-initialize
	the data at the corrupted
	location.
INPUT A VALUE!	• You are trying to print	24
	numbering labels without any
	input.
	➜ Input the numbers you want.
LABEL LONGER THAN	• To print, press SET.	30
SETTING	• To cancel printing, press
SET/ESC	ESC. You can then decrease
	the number of characters,
	change to a longer tape
	setting, or select auto tape
	length.
LENGTH OF PRINT IS	• You are trying to print	17, 30
TOO LONG!	something that is longer than
	the length of tape available.
	➜ Make the label shorter or
	reduce the number of copies.

Message	Cause and Action	See page:
LOAD A TAPE	• There is no tape cartridge	13
CARTRIDGE	loaded in the printer or the
	tape cartridge is not loaded
	correctly.
	➜ Check the tape cartridge.
LOW BATTERY!	• Battery power is low.	47
	➜ Replace the batteries or use
	the bundled AC adaptor to
	power the printer.
	• Temperature is below 10˚C
	(50˚F)
	➜ Move the printer to a location
	where the temperature is
	within the operating
	temperature range (10˚C to
	35˚C (50˚F to 95˚F)).
LOW BATTERY!	• Battery power is low.	47
CONTINUE TO	➜ Replace the batteries or use
PRINT?	the bundled AC adaptor to
SET/ESC	power the printer.
	• Temperature is below 10˚C
	(50˚F)
	➜ Move the printer to a location
	where the temperature is
	within the operating
	temperature range (10˚C to
	35˚C (50˚F to 95˚F)).

53E