Casio KL-7400 CONT, UNCUT, Message, Message, See page:, See page:, Cause and Action, CUT, or FULL CUT, Cause and Action, HALF CUT, FULL+HALF

Message		Cause and Action	See page:
PRINT ERROR!	•	You are using magnetic tape	20
CHECK THE TAPE		and the cut mode is CONT
CARTRIDGE!		HALF CUT, FULL+HALF
		CUT, or FULL CUT.
	➜ Change the cut mode to
		UNCUT before printing.
	*	If the steps described above
		do not clear the error
		message, contact your
		retailer or your nearest
		CASIO service center.
THIS IS THE WRONG	•	The cassette cover is not	13
TYPE OF TAPE		closed completely.
CARTRIDGE!	➜ Close the cassette cover.
	•	The label you are trying to
		print or recall is not compat-
		ible with the currently loaded
		tape cartridge.
	➜ Turn off the printer and
		replace the tape cartridge.
	•	You replaced the tape
		cartridge while the printer
		was turned on.
	➜ Turn off the printer and
		replace the tape cartridge.

Message	Cause and Action	See page:
TOO MANY	• Pasting copied text will cause	40
CHARACTERS!	the number of characters to
SOME WERE NOT	exceed the allowable limit for
PASTED	the location where you are
	pasting.
	➜ Re-input so the pasted text
	does not cause the allowable
	number of characters to be
	exceeded.
TOO MANY LINES TO	• Printing with a frame will	34
FRAME!	cause your label to have
	more than the allowable
	number of lines.
	➜ Decrease the number of
	lines or change to a wider
	tape.
TOO MANY LINES!	• You are trying to print a label	28
	that has more than the
	allowable number of lines.
	➜ Decrease the number of
	lines or change to a wider
	tape.

55E