Casio KL-7400 Using the AC Adaptor, To initialize printer memory, To turn power on and off, Auto Power off, Mode Selection Basics, To load a tape cartridge, Tape Cut Modes

Operating Precautions

Observe the following precautions to ensure that the printer provides you with the years of trouble-free operation for which it is designed.

•Avoid use in areas subjected to direct sunlight, high humidity, and temperature extremes. Operating Temperature Range: 10°C to 35°C (50°F to 95°F)

•Battery capacity becomes lower at temperatures of 10°C (50°F) and colder. This can cause the “LOW BATTERY!” message to appear sooner than normal. If this happens, move the printer to a location that is within the operating temperature range (10°C to 35°C (50°F to 95°F)).

•Never allow paper clips, pins, or other similar objects to get inside the printer mechanism.

•Never pull on the tape with excessive force or try to push it into the cassette.

•Place the printer on a level surface when printing. A tilted surface can make normal printing impossible.

•Unclear printing can indicate a dirty print head. If printing becomes unclear, use the procedures on page 49 to clean the print head and rubber roller.

•Using the printer in an area that is exposed to direct sunlight or any other source of bright light can cause malfunction of its optical sensor, and display of an error message. Use the printer in an area that is not exposed to bright light.

Contents
Safety Precautions ................................................................	1
Operating Precautions..........................................................	5
Unpacking ..............................................................................	7
Part 1 - Getting Ready ...........................................................	8
General Guide ........................................................................	8
Printer Operation Flow .........................................................	9
Power Requirements ..........................................................	10
Using the AC Adaptor .....................................................	10
Initializing Printer Memory .................................................	11
To initialize printer memory .............................................	11
Powering Up ........................................................................	11
To turn power on and off .................................................	11
Auto Power off .................................................................	11
Mode Selection Basics ....................................................	12
Loading and Removing a Tape Cartridge ..........................	13
To load a tape cartridge ..................................................	13
To remove the tape cartridge from the printer .................	14
Using the Printer’s Keys .....................................................	15
Display Symbols and Indicators ........................................	16
Part 2 - Label Printing Basics ............................................	17
Tape Cut Modes ..............................................................	20
Types of Tape Cuts ..........................................................	20
Cut Modes .......................................................................	20
Cut Modes and Margins ..................................................	22

5E