Casio KL-7400 NONE, WIDE, PRINT, UNCUT, UNCUT, Symptom, Symptom, MARGINS, MARGINS, Important, Important, Possible Cause, Possible Cause, Recommended Action

Symptom	Possible Cause	Recommended Action
No tape	The cassette cover is	Close the cassette cover.
comes out	not closed completely.	(page 8)
when I
	The tape is used up.	Replace the tape cartridge
press
		with a new one. (page 13)
PRINT.
	The tape is jammed.	Remove the tape cartridge
		and pull out the jammed tape.
		Use scissors to cut off the
		tape you pulled out. Load the
		tape cartridge back into the
		printer. (page 13)
		Important!
		Note the following while
		printing is in progress.
		• Do not allow the tape outlet
		to become blocked.
		• Do not touch the tape
		coming out of the printer.
		• Do not open the cassette
		cover.
		• Do not turn off the printer.
	Battery power is low.	Change to AC adaptor power
		or load a fresh set of batteries
		(supplied by you). (page 47)

Symptom	Possible Cause	Recommended Action
The ink	Slack in the ink ribbon	Remove the tape cartridge.
ribbon is	when the tape	After making sure that the ink
coming out	cartridge was loaded	ribbon is not broken, take up
of the tape	in the printer.	all the slack. Reload the tape
outlet		cartridge into the printer.
together		(page 13)
with the		Important!
tape.		• Always make sure you
		remove all slack from the ink
		ribbon before loading a tape
		cartridge into the printer.
		• If the ink ribbon is broken,
		replace the tape cartridge
		with a new one.
The tape	The tape cutter is dull.	Have the tape cutter replaced
will not cut.		by your retailer or your local
		CASIO service center.
	Tape is jammed in the	Turn off the printer, remove the
	tape outlet.	tape cartridge, and remove
		the jammed label.
	NONE is selected for	Change the MARGINS
	the MARGINS setting	setting to NARROW, MEDIUM
	of the format being	or WIDE. (page 29)
	used.
	UNCUT is selected for	Change the tape cut mode
	the tape cut mode.	setting to something other
		than UNCUT. (page 20)

51E