Casio KL-7400 manual 57

Message	Cause and Action	See page:
NO DATA!	• You are trying to recall or	45
	delete memory data when
	there is no data in memory.
	➜ Store data in memory before
	performing the current
	operation.
	• You are attempting to	40
	perform a paste operation
	when there is no text copied.
	➜ Copy text first.
NO INPUT TEXT!	• You are attempting a print or	18, 23
	preview operation when
	there is no text input.
	➜ Input text before printing or
	previewing.
	• You are attempting to	40
	perform a copy operation
	when there is nothing input.
	➜ Input text first.
NOT ENOUGH	• You are trying to print a bar	35
DIGITS!	code that does not have the
	required number of digits.
	➜ Re-input the correct number
	of digits.
PENDING DATA WILL	• To delete the text, press SET.	—
BE LOST	• If you do not want to delete
CONTINUE? SET/ESC	the text, press ESC.

Message	Cause and Action	See page:
PRINT ERROR!	• The tape became jammed	13
CHECK THE TAPE	during printing.
CARTRIDGE!	➜ Turn off the printer and
	remove the tape cartridge.
	Next, remove the jammed
	tape.
	• There is something stuck in
	the auto tape cutter.
	➜ Turn off the printer and
	remove the tape cartridge.
	Next, remove whatever is
	stuck in the auto tape cutter.
	• There is dirt, tape pieces, or	49
	other foreign matter stuck to
	the rubber roller.
	➜ After removing the foreign
	matter from the rubber roller,
	clean the rubber roller.
	• The printer is being used in	—
	an area that is exposed to
	direct sunlight or some other
	source of bright light, causing
	malfunction of its optical
	sensor.
	➜ Turn off the printer and then
	move it to a location that is
	not exposed to bright light.

E54