FREE DESIGN: Configuring Label Form SettingsYou can use the procedure in this section to configure label form settings.■To configure label form settings1.In the Free Design Mode, input the text you want.2.Press FORM.

3.Use and to select the setting you want to change, and and to change the currently selected setting.

When this setting

Use

and

to select the option you want:

is selected:

 

 

 

DIRECTION• HORIZONTAL: Positions text from left to right

 

• VERTICAL: Positions text from top to bottom
ALIGN• LEFT: Aligns text flush left.
•EQUAL: Equally spaces text to fill the entire space available.•CENTER: Centers text.•RIGHT: Aligns text flush right.•See page 31 for more information.

PITCH • Specify a value from 0.0 mm (0") to 31.9mm (1 1/4"). Changing this setting also causes the tape length to change accordingly.

•This setting cannot be changed when EQUAL is selected for the ALIGN setting, and when FIX is selected for the TAPE LENGTH setting.

MIRROR • NORMAL: Prints the tape normally.

•MIRROR: Prints the tape in mirror image onto special optionally available iron transfer tape.

When this setting

and

to select the option you want:

Use

is selected:

 

 

MARGINS • NARROW: 6mm (1/4") margins•MEDIUM: 20mm (13/16") margins•WIDE: 38mm (1 9/16") margins•NONE: 0mm (0") margins•See page 30 for more information.

TAPE LENGTH • AUTO: Automatically adjusts tape length in accordance with the number of characters.

•FIX: Maintains a fixed tape length in the range of 0cm (0") to 99.9cm (39 5/16"). See page 30 for more information.

•You also can change the DIRECTION setting while creating a label in the Layout Mode (page 23) or Numbering Mode (page 24).

•You also can change the MIRROR setting while creating a label in the Layout Mode or Numbering Mode.

•You also can change the MARGINS setting while creating a label in the Numbering Mode. Note, however, that NONE cannot be selected for the MARGINS setting at this time.

4.After all the label form settings are the way you want, press SET.
29E