Casio KL-7400 FREE DESIGN: Controlling the Length of a Tape Label, CUT, SET, Note, WIDE, FORM, NONE, NONE, NONE, Press, Press, NARROW, MEDIUM, Margins, 20.5cm], [20.6cm]

MarginsYou can select from among the following four margin settings.

Note

•All of the margin measurements mentioned below are approximate.

NARROW

3.0mm (1/8")3.0mm (1/8")

MEDIUM

10mm (3/8")10mm (3/8")

WIDE

19mm (3/4") 19mm (3/4")

Important!

•Margins are not cut in the case of short tape lengths (28mm (1 1/8") for NARROW, 35mm (1 3/8") for MEDIUM, 44mm (1 3/4") for WIDE). After printing, you can use scissors to trim to the margin you want.

FREE DESIGN: Controlling the Length of a Tape Label

Tape label length is normally adjusted in accordance with the size and number of the characters in the label. This section explains how you can control the length of your labels.

1.In the Free Design Mode, input the text you want.

2.Press FORM.

3.Use and to scroll to the TAPE LENGTH setting screen.4.Use and to change the setting to FIX, and then press .

5.Use the number keys, or the (decrease) and (increase) keys to change the label length setting.

Length value becomes highlighted.

•The appearance of the tape length value on the display will change in accordance with your setting as described below.

NONE

•Setting with the NONE setting makes it possible to print consecutive labels one after another.

•The auto tape cut operation is not performed when NONE is selected for the margins. To cut the tape, press CUT.

[20.6cm]	(20.6cm]
➜	➜
Label can be printed	Label will be printed at
as specified.	specified length with
	condensed characters.

6.Press SET.

20.5cm]

➜

Label will be printed but the tape length will be longer than specified.

E30