Casio KL-7400 Text Editing, To clear all text, Clearing Input Text, To switch between overwrite and insert, To delete a range of text (Free Design), ALL, ALL, SET, SET

Clearing Input Text

Use the following steps to clear text on the input screen.

To clear all text

1.Press FUNCTION and then BS (CLS).

•If you are deleting all text in the Free Design label mode, a screen will appear

to offer you a choice between ALL or PART. Use and to select ALL, and then press SET.

2.In response to the confirmation message that appears, press SET.

•This clears all the text from the input screen.

•If you want to abort the clear operation without deleting anything, press ESC in place of SET.

To delete a range of text (Free Design)

1.Press FUNCTION and then BS (CLS).

2.Use and to select PART, and then press SET.

3.Use and to move the cursor to the first character of the range of text from which you want to delete, and then press SET.

4.Use and to move the cursor to the last character of the range of text to which you want to delete, and then press SET.

Text Editing

You can set up the label printer so it either inserts new input between existing characters, or overwrites existing characters with new input. Note the following example.

Example

Existing text: ABCDEFGHI

Cursor location: E

New input: XXX

Insert

Result: ABCDXXXEFGHI

Overwrite

Result: ABCDXXXHI

To switch between overwrite and insert

1.Press SET UP to display the SET UP menu.

2.Use and to select INPUT and then press SET.

3.On the next screen that appears, use and to select INSERT, or OVERWRITE and then press SET.

•The CAPS indicator on the display is highlighted when overwrite is turned on. The CAPS indicator appears normally (unhighlighted) when insert is turned on.

39E