Casio Not available Calibrating the Touch Panel (Calibrate TP), Selecting the HDMI Terminal Output Method (HDMI), Auto, 480p, 576p, Procedure, Procedure, 1.Touch “Start”

Calibrating the Touch Panel (Calibrate TP)

Procedure

MENU * Setup * Calibrate TP

Calibrate the touch panel whenever a touch operation does not produce the desired results or if touch panel response is poor.

1.Touch “Start”.

2.Use the stylus to touch the centers of each of the four cross marks (+) as they appear on the screen. Take your time when performing this operation and wait until the next cross appears.

The message “Complete” indicates that touch panel calibration is complete.

•Carefully touch the center of each cross mark (+).

•When calibrating the touch panel, position and hold the camera as you do during normal shooting (page 15).

Selecting the HDMI Terminal Output Method (HDMI)

Procedure

MENU * Setup * HDMI

Use this setting to select the digital signal format when connecting to a TV with an HDMI cable.

Auto	This setting will cause the format to change automatically in accordance
	with the connected TV. Normally, you should use this mode.
1080i	1080i format output*
480p	480p format output
576p	576p format output

*1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required output method may be 576p when outputting to a digital TV in a PAL reception area that does not support 1080i 60i. If you are in a PAL reception area and nothing is

displayed automatically, change the setting to 576p.

•If an image does not appear when “Auto” is selected as the output method, try changing this setting to something else.

100 Other Settings (Set Up)